User Manual

4.9.2. Internet Access Control
Figure 4-25
The rules of “Internet access control” based on source IP, port number and protocol. Follow
these steps to set Internet Access Control:
1. You can select “Default IP Firewall Rule” and click “Save Settings” to enable “Internet
Access Control” function. This is only the first step, you should continued to create
appropriate rules for “Internet Access Control”.
2. Input description information for current access control rule in the “Description” field.
Input IP address of host you want to restrict .If the rule has already existed in “Protocol
Template”. You can select appropriate item and apply it. Or you can input protocol type and
port number manually, click “add” button, then the item will displayed in the list.
3. There are two items supplied, “Permit wireless connection for MAC address listed (others
are Denied)” and “Deny wireless connection for MAC address listed (others are Permitted)”,
Select the item you want, and click “Save Settings” button
4. If you want to delete certain item on the list, select appropriate item on the list, click
“delete” to delete it