User Manual

pass-through the router
¾ L2TP Pass-through
L2TP means the “Layer 2 Tunneling Protocol”, you can select “enable” to allow L2TP
pass-through the router
¾ IPSEC Pass-through
IPSEC (Internet Protocol Security) is a suite of protocols used to implement secure exchange;
you can select “enable” to allow IPSEC pass-through the router
4.9. Security management
This feature provides security and network protection by using “Internet access control”,
“Firewall” and some other options
4.9.1. MAC Filter
Figure 4-24
You can filter wired users by enabling this function; thus unauthorized users can not access
the network. Follow these steps to set MAC filter:
1. Add MAC address you want to control in the “MAC address” field (the format is
XX-XX-XX-XX-XX-XX), then click “Add” button, and you will see the MAC address has
displayed in the MAC list.
2. There are two items supplied, “Permit wireless connection for MAC address listed (others
are Denied)” and “Deny wireless connection for MAC address listed (others are Permitted)”,
Select the item you want, and click “Save Settings” button.