User Manual

802.11 protection, it will ameliorate performance of 802.11g devices in your wireless network
¾ Preamble Type
"Short Preamble" is suitable for heavy traffic wireless network. "Long Preamble" provides
much communication reliability; the default setting is "Long Preamble”
4.6. LAN Setup
It includes LAN IP address and DHCP Server. You can change the default IP address of LAN
port by using this item, after changing IP address of LAN port, the router will restarted
automatically. You can also choose enable or disable of the DHCP server, set the range of
DHCP address pools
4.6.1. LAN IP address
Figure 4-18
The IP address of LAN port is used for access router itself by computers that connect to the
router directly; here you can set IP address you need. The IP address format is like X.X.X.X,
and default IP address is 192.168.1.1, the default subnet mask is 255.255.255.0.
4.6.2. DHCP Server
Figure 4-19
¾ DHCP Server Status
Keep the default setting “Enable”, so router is able to use DHCP function. If a DHCP server has
already existed in the network, please select “Disable”.
¾ IP Address Pool
The IP Address pool is used for allocate IP address by DHCP server; The IP Address pool range
is also changeable