User Manual
4.5.3. Host Filter
Figure 4-15
You can filter wireless users by enabling this function; thus unauthorized users can not access
the network. To disable “Wireless Host Filter”, keep the default setting “Disable”. To enable
“Wireless Host Filter”, follow these steps to set “Wireless Host Filter”.
1. Add MAC address you want to control in the “MAC address” field (the format is
XX-XX-XX-XX-XX-XX), then click “Add” button, and you will see the MAC address has
displayed in the MAC list.
2. There are two items supplied, “Permit wireless connection for MAC address listed (others
are Denied)” and “Deny wireless connection for MAC address listed (others are Permitted)”,
Select the item you want, and click “Save Settings” button
4.5.4. Association table
Figure 4-16
Display current status of the wireless client associate with AP