User Manual

4.2.3. Primary AP Info
Figure 4-6
This item provides current running information of Primary AP
¾ Wireless status
Display wireless interface status is enabled or not
¾ Number of Wireless Client
Display the current number of wireless stations associated with router
¾ Wireless Mode
Current wireless mo
，
de of wireless router the default setting is ”AP(Access Point)” mode.
¾ Channel
Display current channel of your wireless router.
¾ SSID
SSID (Service Set Identifier) is your wireless network's name shared among all points in a
wireless network. The SSID must be identical for all devices in the wireless network. So make
sure all points in the wireless network have the same SSID, I suggested to use the default SSID.
¾ Wireless Interface MAC Address
The MAC address is used for wireless communication
¾ SSID Broadcasting
You can select “enable” or “disable” to enable or disable the broadcast SSID function, If the
setting of this field is disable, wireless client can not obtain this SSID to login in, then user have
to input the SSID value manually
¾ Security Mode
Display whether your security wireless function have been applied.