User Manual

4.1.3. Static User
Figure 4-3
This item should only be used when users use a static IP address to access Internet, you should
input your “WAN IP address”, ”subnet mask”,” default gateway” and “DNS server (domain
name server) IP address” according to the information provided by your ISP. And every IP
address should be input in appropriate IP field, a IP address only divided into four IP octets by
sign”.” is acceptable.
¾ WAN IP address
The IP address that your Internet access into
¾ Subnet mask
Specify a Subnet Mask for your WAN segment
¾ Default gateway
It is provided by your ISP
¾ Primary DNS
DNS server is used for resolve domain name. Your ISP will provides you with at least one DNS
IP address, input IP address of your DNS server in this field
¾ Secondary DNS
Input IP address of backup DNS server, or you can leave this field blank.
4.1.4. Wireless Configuration
You can choose “Enable” or “Disable” to enable or disable the wireless function. The default
setting is ”enable”. If you chose the “Disable” status, the router will become a wired broadband
router without wireless function, so be careful when you choose this status.