User Manual

Figure 3-17
3.2. Additional Settings for Wireless Client
If you choose to access the router via a wireless client, also verify the following:
1. Make sure your PC is equipped with 802.11b 802.11g or 802.11n wireless adapter and
has appropriate WLAN card driver/utility and TCP/IP installed.
2. Set the wireless adapter to use appropriate TCP/IP settings as described in previous
section.
3. Launch the wireless adapter’s provided utility and verify that your wireless client is
configured with these settings:
z Operation Mode: Infrastructure
z SSID: default
z Authentication: Disabled
z Encryption: Off
z Radio Band: 802.11B/G/N