User's Manual

Wireless Broadband Router User manual
Page 8 of 56
Ethernet cable. This is the only port you can use for this procedure. This enables
your router to access the Internet. The port supports 10/100 Mbps as well as
straight-through and crossover Ethernet cables.
Reset button: Resets your router or resets the router to the default login
settings.
Antenna: The antenna used for wireless connections. You are able to rotate
the antenna to gain the best signal reception.
If the router experiences trouble connecting to the Internet, briefly press
and release the Reset button to reset the router. To reset the router to the
factory defaults, press and hold the Reset button for more than five seconds.
This clears the router’s user settings, including User ID, Password, IP Address,
and Subnet mask. (Warning: your original configurations will be replaced with
the factory default settings)
3.2 LED Description
The following illustration shows the Wireless Broadband Router front panel:
Figure 3 front panel
Number LED Light Status Description
1 PWR ON This indicator lights green when the
Wireless Router is receiving power;