User's Manual

Wireless Broadband Router User manual
Page 52 of 56
Figure 63
z New Password. Enter your new password.
z Confirmed New Password: Enter your new password again for verification
purposes.
z Click “Apply” at the bottom of the screen to change the password.
If you forget your password, you’ll have to reset the router to the factory
default (Password is “guest”) with the reset button (see router’s front panel).
6.11.2 Remote Mgmt
This feature allows you to manage the Router from a remote location, via the
Internet. To enable this feature, check the “Management Port” checkbox, and
click the Apply button.
Figure 64
z Management Port: Enter the port number.
z Click “Apply” at the bottom of the screen to change the Management Port.
When you want to access the web-based management from a remote site,
enter http:// WAN IP Address:8080. (e.g:
http://192.168.1.1:8080
).
6.11.3 WAN Link Status & Setup
Figure 65