User's Manual

Wireless Broadband Router User manual
Page 11 of 56
Chapter 5 Configuring Local PC to Access the
Wireless Router
You can manage the Wireless Broadband Router through the Web
browser-based configuration utility. To configure the device via Web browser,
at least one properly configured computer must be connected to the device via
Ethernet or wireless network. The Wireless Broadband Router is configured
with the default IP address of 192.168.1.1 and subnet mask of 255.255.255.0
and its DHCP server is enabled by default. Before setting up the Router, make
sure your PCs are configured to obtain an IP (or TCP/IP) address automatically
from the Router by the steps below.
5.1 Setting up TCP/IP
5.1.1 Windows 2000
Please follow the steps below to setup your computer:
Step 1: Go to Start
Æ Settings Æ Control Panel
Figure 4
Step 2: Double click the icon Network and Dial-up Connections