User's Manual

Wireless Network Adapter User manual
Page 10 of 31
3.2 PCI adapter
Figure 9
The status LED indicators of the PCI wireless adapter are described in the following.
z PWR ON (Green): Indicates power on
z Lnk/Act ON (Green): Indicates a valid connection
z Lnk/Act Flashing: Indicates the adapter is transmitting or receiving data.
Install PCI adapter
z Open your PC case and locate an available PCI on the motherboard.
z Slide the PCI Adapter into the PCI slot. Make sure that all of its pins are touching the
slot’s contacts. You may have to apply a bit of pressure to slide the adapter all the
way in. after the adapter is firmly in place, secure its fastening tab to your PC’s
chassis with a mounting screw. Then close your PC.
z Attach the external antenna to the adapter’s antenna port.
z Power on the PC.