User Manual

NW350/NW360 User Manual
10
3. Install NW350/NW360
The NW350/NW360 supports up to 300 Mbps wireless connection. This card is fully
compliant with the specifications defined in IEEE802.11n standard. It is designed to
complement PCI Local Bus computers or USB2.0 computers and supports
Windows98SE/Me/2000/XP/Vista.
3.1. NW350
Figure 3-1
The status LED indicators of the NW350 are described in the following.
¾ PWR ON (Green): Indicates power on
¾ Lnk/Act ON (Green): Indicates a valid connection
¾ Lnk/Act Flashing: Indicates the adapter is transmitting or receiving data.
Install NW350
¾ Open your PC case and locate an available PCI on the motherboard.
¾ Slide the NW350 into the PCI slot. Make sure that all of its pins are touching the slot’s
contacts. You may have to apply a bit of pressure to slide the adapter all the way in. after
the adapter is firmly in place, secure its fastening tab to your PC’s chassis with a
mounting screw. Then close your PC.
¾ Attach the external antenna to the adapter’s antenna port.
¾ Power on the PC.