User's Manual

ADSL2+ModemRouterUserManual
63
defined in “Periodic Inform Interval” field; when this field is disabled, the device will  only
sendInformRPCtotheACSserveronceatthesystemstartup.
PeriodicInformInterval:theintervaltosendInformRPC

ConnectionRequestparameters:
UserName:usernametheremoteACSshouldusewhenconnectingtothedevic
e
Password:passwordtheremoteACSshouldusewhenconnectingtothedevice
Path:thepathofthedeviceConnectionRequestURL.
Port:theportofthedeviceConnectionRequestURL


4.3.5PortMapping
The device provides multiple interface groups, up to five interface groups are supported 
includingonedefaultgroup.Trafficcomingfromoneinterfaceofagroupcanonlybeflowed
totheinterfacesinthesameinterfacegroup.Thus, thedevicecanisolatetrafficfromgroup
to group for soma application.  By defa
ult, all the interfaces (LAN and WAN) belong to the
defaultgroup,andtheotherfourgroupsareallempty.Itispossibletoassignanyinterface
toanygroupbutonlyonegroup.

ChooseAdvanced‐>PortMappingpage,youcanconfigurethemappinggroup.