Manualshelf

User's Manual

ManualsBrandsNETIS SYSTEMS ManualsElectronics150MBPS WIRELESS N ADSL2+ MODEM ROUTER
51525354555657585960
ADSL2+ModemRouterUserManual
59
Phy port: the incoming port of the rule. It indicates the physical port of the traffic is
incoming.
Set Priority: the priority of the rule. It can be p0(highest), p1,p2,p3(lowest). The traffic
matchestherulewillbeassignedthepriorityyouhaveconfigured.
Insert or modify QoS mark: you can insert or modify the DSCP or 802.1p tag. The traffic
matchestherulewillbeaddedormodifiedthemark
.
Note:
If you select 802.1p tag, please make sure 802.1q is enabledin specified WAN interface,
otherwise802.1ptagwillnotbetagged.
TheQoSRulelistshowsthecurrentrulesonthedevice.
Delete:selectarulethenpress“delete”button, the selectedrulewillbedeletedfromQos
rulelist.
Deleteall:deletealltherulesfromQoSrulelist.
(2) 802.1p
If the QoS policy is “802.1p based”, you should configure the 802.1p setting. Press the
“802.1pconfig”buttontoconfigurethe802.1ppriority.