User's Manual

ADSL2+ModemRouterUserManual
51

UsualServiceName&User‐definedServiceName:thenameofthisvirtualserver
Protocol:theprotocolofthisvirtualserverused,itincludeTCP&UDPtype.
WANSetting:theWANsettingofthisvirtualserverused;itcanbeinterfaceandIPaddress.
WANInterface:theinterfaceonwhichthevirtualserverusedonWANside
WANIPAddr
ess:theIPaddresswhichthevirtualserverusedonWANside.Youcanaccess
thisIPandWANportfromWANsidetoobtaintheservice.
WANPort:theopenportonWANside.Itcanbeeitherasingleportoraportra
nge.
LAN Open Port:
Enter thespecificstart and endportnumber you wantto forward. Ifit is one
portonly,youcanentertheendportnumberthesameasstartportnumber.Forexample,you
wanttosettheFTPvirtualserver,youcansetthestartandendportnumberto21.

LANIPAddress:theIPaddressofthehostwhichprovidestheserviceonLANside.
CurrentVirtualServerForwarding Table:Thisdisplaystheinformationaboutthevirtual
serversyouestablish.
