User Manual

Wireless-N 3G Router User Manual
68 / 69
to see if the adapter is properly installed.
 Make sure the wireless client uses the same SSID and security settings (if enabled) as the
150Mbps Wireless-N Broadband Router.
 Ensure that the wireless adapter‟s TCP/IP settings are correct as required by your network
administrator.
 If you are using a 802.11b wireless adapter, and check that the 802.11G Mode item in Wireless
Basic Setting page, is not configured to use 802.11G Performance.
 Use the ping command to verify that the wireless client is able to communicate with the router‟s
LAN port and with the remote computer. If the wireless client can successfully ping the router‟ s
LAN port but fails to ping the remote computer, then verify the TCP/IP settings of the remote
computer.