User Manual

Wireless-N 3G Router User Manual
48 / 69
4.5.1.4. Host Filter
Figure 4-27
 Wireless Access Control Status: the default is disable. To disable “Wireless Access Control
Status”, keep the default setting “Disable”
Please select “enable” if you want to configure Wireless Access Control, then you can follow the
following steps to set:
1. Add MAC address you want to control in the “MAC address” field (the format is
**-**-**-**-**-**), then click “Add” button, and you will see the MAC address has displayed in the
MAC list.
2. There are two items supplied, “Permit wireless connection for MAC address listed (others are
Denied)” and “Deny wireless connection for MAC address listed (others are Permitted)”, Select the
item you want, and click “Save” button
4.5.1.5. Host List
Figure 4-28
Display current status of the wireless client associate with AP