User Manual

Wireless-N 3G Router User Manual
46 / 69
configure it according with WPA-PSK or WPA2-PSK
4.5.1.3. WDS
Figure 4-26
If you have selected WDS or AP+WDS mode in Wireless Basic-Radio Mode, please do the following
configurations
 WDS Name: Give a description of your wireless bridge to tell apart
 WDS MAC Address: If the current working mode is “WDS” or “AP+WDS”, then you need to
configure wireless bridge configuration. Enter MAC address of remote access point, at the
same time the remote access point also need to configure to “WDS” or ”AP+WDS” mode
 Current WDS Information: It illustrates basic information of all wireless bridge that in
connection status, you may delete unnecessary bridge.
AP1: