User Manual

Wireless-N 3G Router User Manual
9 / 69
LAN1-LAN4
ON
LAN Connection normal
Flashing
Data transmitting
OFF
LAN Connection abnormal
WLAN
Flashing
Wireless data transmitting
OFF
Wireless off
WPS
Flashing
slowly
WPS is running
OFF
WPS is not running
Rear panel
Figure 2-2
Description
Function
PWR port
Connect to Power adapter, please don‟t use the unknown
power adapter, otherwise your device may be damaged.
PWR
Turn on /off the router
USB
3G card is connected to this port
LAN port
Connect with computer NIC or Ethernet device
WAN port
Internet access
WPS
Please refer to WPS
2.3. Restore to Factory Configuration
If the router ever freezes in a setting change process or if you can‟t access it because you can‟t
remember the IP you have given it or other problem, you may have to utilize the reset button on the
back of the router to put it back to factory settings. You have to press and hold this button for a few
seconds (2-6s) with a pencil when it is working, then release and it will restore settings to the factory
configuration.
The other way to restore factory settings is through the same user interface used in setup. Click on