User manual

150Mbps Wireless-N Broadband Router User Manual
44
 Select radio mode is ‘Access Point’ in wireless management-basic of AP1.
 Select Channel is ‘Channel 6’ in wireless management-basic of AP1.
Figure 4-34
AP2:
 Select radio mode is ‘REPEATER’in wireless management-basic of AP2.
 Select Repeater SSID is ‘Netis1’in wireless management-basic of AP2.
 Select Channel is ‘Channel 6’in wireless management-basic of AP2.
 The IP address of AP2 should be 192.168.1.x (1<x<255,e.g.: x=8).
 Select ‘LAN setup’-‘DHCP server’ ,select disable DHCP server.
Figure 4-35