Wireless-N PCI/PCI-E Adapter Quick Installation Guide netis Wireless N PCI-E Adapter Quick Installation Guide 1
Wireless-N PCI/PCI-E Adapter Quick Installation Guide Indication that the product meets the requirements of 47 CFR Part 68. Check Your Package Contents The following items should be found in your package: Ø Wireless-N PCI/PCI –E Adapter Ø Quick Installation Guide Ø CD-ROM Make sure that the package contains above items. If any of the above items is missing or damaged, please contact the store you bought this product from.
Wireless-N PCI/PCI-E Adapter Quick Installation Guide Figure 1 Ø Step 1 Select language and then click “Next ” Figure 2 Ø Step 2 Click “Next” 3
Wireless-N PCI/PCI-E Adapter Quick Installation Guide Figure 3 Ø Step 3 Select setup type and then click “Next ”, if no such option, go to Step 4 Figure 4 Ø Step 4 Click “Install ”, if no such option,go to Step 5 4
Wireless-N PCI/PCI-E Adapter Quick Installation Guide Figure 5 Ø Driver is being installed, please wait. Figure 6 Ø Step 5 After installation is complete, if you are asked to restart you may do so immediately, or you may choose to do so later, after closing and saving work in other programs.
Wireless-N PCI/PCI-E Adapter Quick Installation Guide Figure 7 Insert the Wireless-N PCI/PCI-E Adapter Plug the Wireless-N PCI/PCI-E Adapter into an available PCI/PCI-E slot on your computer, Please follow the steps below for installation. l turn off your computer and open the mainframe box. l Find an available PCI/PCI-E slot,then insert the PCI/PCI-E adapter into it and make it stable ,refer to Figure 8.
Wireless-N PCI/PCI-E Adapter Quick Installation Guide Figure 9 Ø Click “Finish” to finish the hardware installation Figure 10 Connecting to a wireless network You can double-click the icon on your desktop to run it.
Wireless-N PCI/PCI-E Adapter Quick Installation Guide LAN Utility. Note: If you are using Windows XP, you can use either the Windows Zero Configuration Utility or the netis software, but netis Wireless LAN Utility is recommended. Double click the icon as Figure 10 on the desk-top Figure 11 You can use the following methods to connect to a wireless network.
Wireless-N PCI/PCI-E Adapter Quick Installation Guide Figure 13 Method 2 You can follow steps below to connect to wireless network if you only install Drive without Unity in Step 3. Double click “My Network Places”, then click “View network connections” and right click “Wireless network connections” to select “Available wireless network connections”, and available wireless networks will be displayed, you can then double click on the network that you wish to connect to.