User Manual

7
3.2 NETIO PowerPDU 4C specifications
Power 100–240 V; 50/60 Hz; 10 A
Switched outputs NETIO PowerPDU 4C: 10 [8] A total per device / 8 A per output
Internal consumption Max 4.1 W
Output relay
Micro-disconnection (µ) (resistive load)
1E5 switching cycles, max. 1.5 kV pulse voltage
Switch heat and fire resistance class 1
Electrical load
ZCS (Zero Current Switching) on each output
- Resistance load compatible
- Capacitive load compatible
- Inductive load compatible
Interfaces
2x Ethernet RJ-45 10/100 Mbit/s
1x RS-232 (green 3-pin terminal block – Rx, Tx, GND)
Environment
IP30, protection rating = class 1
Operating temperature 0–50 °C
Device rated for pollution degree 2.
Designed for continuous operation in altitudes up to 2000 m.
Does not require additional cooling
2x network interface
NETIO PowerPDU 4C features two RJ45 Ethernet jacks.
LAN SWITCH
PWR IN C14
O2
O1
O3
O4
4x IEC-320 C13
COM
RS-232
NETIO PowerPDU 4C
Power Output control
LAN1
LAN2
Figure 1. NETIO PowerPDU 4C block diagram