User Manual

5.1.2 Scheduler/Timer

The Scheduler/Timer function can be used to switch the output on and off at specified times.

Select a schedule to specify when the output should be turned on. After selecting a schedule, the

on-times for the output according to that schedule are shown graphically. Click Save Changes to

confirm the schedule change. After the changes are saved, the Timer/Scheduler is immediately

active and sets the output state accordingly. If an output that is currently switched on would be

switched off by activating the timer/scheduler, by default such a change needs to be confirmed.

In the standard WEB GUI, the displayed schedule cannot be changed. To change a schedule, click

Edit schedules.

To manually enable or disable the Scheduler/Timer for a given output, click the

Scheduler/Timer button next to that output. When the Scheduler/Timer function is disabled, the

outputs stay in their current states. When it is enabled, the outputs are set according to the

schedule.

Figure 7. Configuring the Timer/Scheduler