User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Configure Multicast Routing User Manual429
View the DVMRP Route
To view the multicast DVMRP route:
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select Routing> Multicast > DVMRP > DVMRP Route.
5. T
o refresh the page with the latest information on the switch, click the Refresh button.
The following table describes the nonconfigurable information that is displayed.
Source Mask The network mask used with the source IP address.
Expiry Time The amount of time remaining before this prune will expire at the
upstream neighbor
. If no prune messages were received from
downstream neighbors, this is set to the value of the default prune
lifetime timer; otherwise, it is set to the smallest received value or the
default timer, whichever is less.
Table 160. DVMRP Route
Field Description
Source Address The network address that is combined with the source mask to identify
the sources for this entry
.
Source Mask The network subnet mask used with the source IP address to identify
the sources for this entry
.
Upstream Neighbor The address of the upstream neighbor (for example, RPF neighbor)
from which IP datagrams from these sources are received.
Table 159. DVMRP Prune (continued)
Field Description