User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Configure OSPF and OSPFv3 User Manual390
The following table describes the nonconfigurable information that is displayed.
Configure OSPFv3
Configure Basic OSPFv3 Settings
To configure the basic OSPFv3 settings:
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select Routing > OSPFv3 > Basic > OSPFv3 Configuration.
Table 140. NSF OSPF Summary
Field Description
Restart Status The restart status of OSPF Helper feature. The possible values are as
follows:
• Not Restarting
• Planned Restart
• Unplanned Restart
Restart Age (seconds) The amount of time since the last restart occurred.
Restart Exit Reason Displays how the master unit on the switch last started up. The possible
values are as follows:
• Not Attempted. Graceful restart was not attempted.
• In Progress. Restart is in progress.
• Completed.
The previous graceful restart completed successfully.
• Timed Out.
The previous graceful restart timed out.
• Topology Changed.
The previous graceful restart terminated
prematurely because of a topology change.