User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Configure Switching Information User Manual265
5. Use the MVR Group IP to specify the IP address for the new MVR group.
6. Use the Count to specify the number of contiguous MVR groups.
This helps you to create multiple MVR groups through a single click of the Add button. If
the field is empty
, then clicking the button creates only one new group. The field is
displayed as empty for each particular group. The range is from 1 to 256.
7. Click the Add button.
The MVR group is added.
The following table describes the nonconfigurable information displayed on the page.
Configure an MVR Interface
To configure an MVR interface:
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select Switching > MVR > Advanced > MVR Interface Configuration.
Table 95. MVR Group Configuration
Field Definition
Status The status of the specific MVR group.
Members The list of ports that participate in the specific MVR group.