User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Configure Quality of Service User Manual497
5. Use one of the following methods to select an interface:
• In the Go T
o Interface field, enter the interface in the unit/slot/port format and click on
the Go button.
• Next to the Interface column, select the check box for the interface that you want to
configure.
6. Policy Name. Lists all the policy names from which one can be selected.
This field is not shown for read/write users where the inbound service policy attachment
is not supported by the platform.
7. Click the Apply button.
Your settings are saved.
View DiffServ Service Statistics
This page displays class-oriented statistical information for the policy, which is specified by
the interface and direction. The Member Class list is populated on the basis of the specified
interface and direction and hence the attached policy (if any). Highlighting a member class
name displays the statistical information for the policy-class instance for the specified
interface and direction.
To view the DiffServ service statistics:
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
Table 189. Service Interface Configuration
Field Description
Direction Shows that the traffic direction of this service interface is In.
Operational Status Shows the operational status of this service interface, either Up or
Down.