User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Manage Switch Security User Manual630
The System Information page displays.
4. Select Security
> ACL > Advanced > Binding Table.
5. To delete an IP ACL-to-interface binding, select the check box next to the interface and click
the Delete button.
The following table describes the information displayed in the IP ACL Binding Table.
Configure VLAN ACL Bindings
To configure VLAN ACL bindings:
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select Security >
ACL> Advanced > VLAN Binding Table.
Table 220. IP ACL Binding Table
Field Description
Interface Displays the selected interface.
Direction Displays the selected packet filtering direction for the ACL.
ACL Type The type of ACL assigned to the selected interface and direction.
ACL ID/Name The ACL number (in the case of the IP ACL) or ACL name (in the case
of Named IP
ACL and IPv6 ACL) identifying the ACL assigned to
selected interface and direction.
Sequence Number The sequence number signifying the order of the specified ACL relative
to other
ACLs assigned to selected interface and direction.