User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Manage Switch Security User Manual579
Configure IP Source Guard Binding Settings
To configure IP source guard static binding settings:
1. Launch a web browser.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select Security > Control > IP Source Guard > Binding Configuration.
5. From the Interface menu, select the interface.
6. In the MAC Address field, type the MAC address for the binding.
7. From the VLAN ID menu, select the VLAN for the binding rule.
8. In the IP Address field, specify valid IP address for the binding rule.
9. Click the Add button.
The IPSG static binding entry is added into the database.
The following table describes the nonconfigurable IP Source Guard dynamic binding
configuration information that is displayed.
Table 210. IP Source Guard Dynamic Binding Configuration
Field Description
Interface The interface for which to add a binding into the IPSG database.
MAC Address The MAC address for the binding entry.
VLAN ID The VLAN for the binding entry.