User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Manage Routing User Manual320
This is the amount of time allocated to consider the neighbors reachable after ND
confirmation. The range of reachable time is 0 to 3600000. The default is 0.
16. Use the Adv Interval field to specify the maximum time allowed between sending router
advertisements from the interface.
The range of the maximum advertisement interval is 4 to 1800. The default value is 600.
17. In the Adv Other Config Flag list, select Enable or Disable to specify the router
advertisement other stateful configuration flag.
Default value of other config flag is Disable.
18. In the Adv Suppress Flag list, select to Enable or Disable router advertisement
suppression on an interface.
The default value of the suppress flag is Disable.
19. In the Destination Unreachables list, select to Enable or Disable the mode of sending
ICMPv6 destination unreachables on this interface.
If disabled, then this interface does not send ICMPv6 destination unreachables. By
default, the IPv6 destination unreachables mode is enabled.
20. Click the Apply button.
Your settings are saved.
The following table describes the nonconfigurable information that is displayed.
Table 114. IPv6 Advanced Interface Configuration
Field Description
Operational Mode Specifies the operational state of an interface. The default value is
Disable.
Link State Indicates whether the link is up or down.