User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Configure System Information User Manual121
Configure DHCPv6 Relay for an Interface
To configure DHCPv6 Relay for an interface:
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select System > Services > DHCPv6 Relay.
5. Select the Interface with the information to view or configure.
DHCPv6 Reconfig Packets
Transmitted
The number of DHCPv6 reconfigure messages sent by the interface.
This type of message is sent by a server to a DHCPv6 client to inform
the client that the server has new or updated information. The client then
typically initiates a renew/reply or Information-request/reply transaction
with the server to receive the updated information.
DHCPv6 Relay-forward Packets
T
ransmitted
The number of DHCPv6 Relay-Forward messages sent by the interface.
This type of message is sent by a relay agent to forward messages to
servers.
DHCPv6 Relay-reply Packets
T
ransmitted
The number of DHCPv6 Relay-Reply messages sent by the interface.
This type of message is sent by a server to a DHCPv6 relay agent and
contains the message for the relay agent to deliver to the client.
Table 42. DHCPv6 Server Statistics (continued)
Field Description