User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Manage Switch Security User Manual557
3. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select Security > T
raffic Control > Port Security > Interface Configuration.
5. Use one of the following methods to select a port:
• In the Go T
o Port field, enter the interface in the unit/slot/port format and click on the
Go button.
• Next to the Port column, select the check box for the port that you want to configure,
select multiple check boxes to apply the same setting to all selected ports, or select
the check box in the table heading to apply the same settings to all ports.
6. Specify the following settings:
• Security Mode. Enables or disables the port security feature for the selected
interface.
• Max Allowed Dynamically Learned MAC. Sets the maximum number of dynamically
learned MAC addresses on the selected interface.
• Max Allowed Statically Locked MAC. Sets the maximum number of statically locked
MAC addresses on the selected interface.
• Violation Traps. Enables or disables the sending of new violation traps designating
when a packet with a disallowed MAC address is received on a locked port.
7. Click the Apply button.
Your settings are saved.