User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Configure Switching Information User Manual275
Configure Expandable Port Settings
You can view and configure the expandable ports.
To view and configure expandable ports information:
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select Switching > Ports > Expandable Port Configuration.
The nonconfigurable Operational Port(s) column displays the ports that are operational.
5. In the 40G Interface column, select the check box for the interface.
6. From the Configured Mode menu, select the expandable port mode:
• 1x40G.
The interface is not expanded and functions in 40 mode. This is the default
setting.
• 4x10G.
The interface is expanded to four 10G ports.
7. Click the Apply button.
Your settings are saved.
8. T
o refresh the page with the latest information on the switch, click the Refresh button.