User Manual

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Configure System Information User Manual142
View LLDP Remote Device Information
You can view information on remote devices connected to the port.
To view LLDP remote device information:
1. Launch a web browser
.
2. In the address field of your web browser
, enter the IP address of the switch.
The login window opens.
3. Enter admin as the user name, enter your local device password,
and click the Login
button.
The first time that you log in, no password is required. However, you then must specify a
local device password to use each subsequent time that you log in.
The System Information page displays.
4. Select System > LLDP > Remote Device Information.
5. Use Interface to select the local ports which can receive LLDP frames.
The following table describes the LLDP Remote Device Information fields.
Table 48. LLDP Remote Device Information
Field Description
Remote ID The remote ID.
Switch ID The switch component associated with the remote system.
Switch ID Subtype The source of the switch identifier.
Port ID The port component associated with the remote system.
Port ID Subtype The source of port identifier.
System Name The system name of the remote system.
System Description The description of the given port associated with the remote system.
Port Description The description of the given port associated with the remote system.
System Capabilities Supported The system capabilities of the remote system.