User Manual

Configure System Information
47
ProSAFE 10-Gigabit Smart Managed Switch XS708T and XS716T User Manual
See the description for Time Zone Name in Step 14 for more information. The allowed
range is –12 to 13. The default value is 0.
16. In the Offset Minutes field, specify the number of minutes that the time zone is different
from UTC.
See the description for Time Zone Name in Step 14 for more information. The allowed
range is 0 to 59. The default value is 0.
17. Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
Configure the Global SNTP Settings
 To configure the global SNTP settings:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Change the Default IP Address of the
Switch on page 10.
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is password.
The System Information page displays.
5. Select System > Management > Time > Time Configuration > SNTP Global
Configuration.
When you select the SNTP option as the clock source, the SNTP Global Configuration
section is displayed below the Time Configuration section of the page.