User Manual

Maintenance
387
ProSAFE 10-Gigabit Smart Managed Switch XS708T and XS716T User Manual
7. If the selection from the File Type menu is Archive, the Image Name menu is displayed
and you must select the software image on the switch that must be uploaded to the other
system:
• image1. Select image1 to upload image1.
• image2. Select image2 to upload image2.
8. Click the Apply button.
The file transfer begins.
The page displays information about the file transfer progress. The page refreshes
automatically when the file transfer completes (or if it fails).
Upload a File From the Switch to a USB Device
Use the USB File Upload page to upload files of various types from the switch to a USB
device.
 To use upload a file from the switch to a USB device:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Change the Default IP Address of the
Switch on page 10.
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is password.
The System Information page displays.
5. Select Maintenance > Upload > USB File Upload.
6. From the File Type menu, select the type of file:
• Archive. The archive is the system software image, which is saved in one of two flash
sectors called images (image1 and image2). The active image stores the active copy,