Manualshelf

User Manual

ManualsBrandsNETGEAR ManualsComputers & AccessoriesNETGEAR 8-Port 10Gig Gigabit Ethernet Smart Managed Pro Switch, L2+/Layer 3 Lite, 10 SFP+, ProSAFE Lifetime Protection (XS708T)
271272273274275276277278279280
Manage Device Security
278
ProSAFE 10-Gigabit Smart Managed Switch XS708T and XS716T User Manual
6. Select the check box next to the dot1xList name.
7. From the menu in the 1 column, select the method that must be used r first in the selected
authentication login list.
The options are as follows:
• Local. The user’s locally stored ID and password are used for authentication.
• Radius. The user’s ID and password are authenticated using the RADIUS server
instead of locally.
• None. The user is not authenticated.
8. Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
Configure Management Access
From the Access menu, you can configure HTTP and secure HTTP access to the switch
management interface. You can also configure access control profiles and access rules.
Configure HTTP Settings
Use the HTTP Configuration page to configure the HTTP settings on the system.
To configure the HTTP server settings:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Change the Default IP Address of the
Switch on page 10.