User Manual

Get Started
27
ProSAFE 10-Gigabit Smart Managed Switch XS708T and XS716T User Manual
The check box associated with every port and LAG is selected, and the rows for all ports
and LAGs are highlighted.
3. Configure the desired settings.
4. Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
Context–Sensitive Help and Access to the Support
WebSite
When you log in to the switch, every page contains a link to the online help ( ) that contains
information to assist in configuring and managing the switch. The online help pages are
context sensitive. For example, if the IP Addressing page is open, the help topic for that page
displays if you click the link to the online help.
From the web browser–based management interface, you can access the NETGEAR
support website at www.netgear.com/support.
 To access the support website from the web browser–based management interface:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Change the Default IP Address of the
Switch on page 10.
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is password.
The Switch Information page displays.
5. Select Help > Support.
The Support page displays.
6. To access the NETGEAR support site for the switch, click the Apply button.