User Manual
Get Started
24
ProSAFE 10-Gigabit Smart Managed Switch XS708T and XS716T User Manual
4. Configure the desired settings.
5. Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
To configure a single LAG by using the Go To Interface field:
1. Click the LAGS link or the All link to display the LAGs.
2. In the Go To Interface field, type the LAG number, for example l3.
For information, see Interface Naming Conventions on page 22.
3. Click the Go button.
The check box associated with the interface is selected, the row for the selected interface
is highlighted, and the interface number appears in the heading row.
4. Configure the desired settings.
5. Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
To configure a single port:
1. Ensure that the page is displaying all ports, and not only the LAGs.
2. Select the check box next to the port number.
The row for the selected interface is highlighted, and the interface number appears in the
heading row.
3. Configure the desired settings.
4. Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
To configure a single LAG:
1. Click the LAGS link or the All link to display the LAGs.
2. Select the check box next to the LAG number.