User Manual

Configure Switching

145

ProSAFE 10-Gigabit Smart Managed Switch XS708T and XS716T User Manual

2. Launch a web browser.

3. In the address field of your web browser, enter the IP address of the switch.

If you do not know the IP address of the switch, see Change the Default IP Address of the

Switch on page 10.

The login window opens.

4. Enter the switch’s password in the Password field.

The default password is password.

The System Information page displays.

5. Select Switching > Auto-VoIP > OUI-based > OUI Table.

The OUI Table page displays.

6. Select the check box next to each OUI prefix to be removed.

7. Click the Delete button.

The telephony OUI entries are removed.

Display the Auto-VoIP Status

Use this page to display Auto-VoIP status.

 To view the Auto-VoIP status:

1. Connect your computer to the same network as the switch.

You can use a WiFi or wired connection to connect your computer to the network, or

connect directly to a switch that is off-network using an Ethernet cable.