Manualshelf

User Manual

ManualsBrandsNETGEAR ManualsComputers & AccessoriesNETGEAR 8-Port 10Gig Gigabit Ethernet Smart Managed Pro Switch, L2+/Layer 3 Lite, 10 SFP+, ProSAFE Lifetime Protection (XS708T)
111112113114115116117118119120
Configure System Information
112
ProSAFE 10-Gigabit Smart Managed Switch XS708T and XS716T User Manual
12. Click the Add button.
13. Repeat Step 10 through Step 12 to add a second rule.
You can add up to 20 static IP address–MAC address mappings to a DAI ACL.
14. Select System> Services > Dynamic ARP Inspection > DAI VLAN Configuration.
15. Next to VLAN 1, select the check box.
16. In the ARP ACL Name field, specify the name of the DAI ACL to associate with the VLAN.
For example, enter arpACL.
17. Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
View DAI Statistics per VLAN
To view DAI statistics per VLAN:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Change the Default IP Address of the
Switch on page 10.
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is password.
The System Information page displays.
5. Select System> Services > Dynamic ARP Inspection > DAI Statistics.
The DAI Statistics page displays.