User Manual

Configure System Information
104
ProSAFE 10-Gigabit Smart Managed Switch XS708T and XS716T User Manual
6. Specify where the DHCP snooping bindings database is located.
• Local. The binding table is stored locally on the switch.
• Remote. The binding table is stored on a remote TFTP server.
If the database is stored on a remote server, specify the following information:
a. Specify the IP address of the TFTP server.
b. Specify the file name of the DHCP snooping bindings database in which the
bindings are stored.
7. In the Write Delay field, specify the time to wait between writing bindings information to
persistent storage.
The delay allows the device to collect as many entries as possible (new and removed)
before writing them to the persistent file.
8. Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
Statistics
Use this page to view and clear per-interface statistics about the DHCP messages filtered by
the DHCP snooping feature on untrusted interfaces.
 To view and clear the DHCP snooping statistics:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Change the Default IP Address of the
Switch on page 10.
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is password.
The System Information page displays.
5. Select System> Services > DHCP Snooping > Statistics.