User Manual

8-Port or 16-Port 10-Gigabit/Multi-Gigabit Smart Managed Plus Switch
Use VLANS for Traffic Segmentation User Manual56
9. In the VLAN identifier menu, select the VLAN.
10. Select the ports that you want to add to the VLAN by doing the following:
a. (Optional) In the Group Operation menu, select either Select All or Remove All.
All ports are either added to the VLAN or removed from the VLAN.
b. Select or remove individual ports by selecting the check boxes under the port
numbers.
Note: If ports are members of the same LAG, you must assign them to the
same VLAN.
c. Click the APPL
Y button.
Your settings are saved. In the VLAN Membership table, the ports display as
members of the VLAN.
11. T
o select ports for another VLAN, repeat Step 9 and Step 10.
Create 802.1Q-based VLANs in a basic
configuration
A 802.1Q-based VLAN configuration lets you assign ports on the switch to a VLAN with an ID
number in the range of 1–4093. By default, all ports are members of VLAN 1.
In an advanced 802.1Q-based VLAN configuration, you can set up VLANs to which you can
add tagged or untagged ports and you can use port VLAN ID (PVID). For more information,
Create 802.1Q-based VLANs in an advanced configuration on page 59.