User Manual

8-Port or 16-Port 10-Gigabit/Multi-Gigabit Smart Managed Plus Switch
Use VLANS for Traffic Segmentation User Manual52
Use the ProSAFE Plus Utility to create basic port-based
VLANs
To create basic port-based VLANs:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is
of
f-network using an Ethernet cable.
2. Double-click the ProSAFE Plus Utility icon.
The Switch Selection page displays a list of Web Managed switches that it discovers on
the local network.
3. Select the switch.
If you do not see the switch, click the REFRESH button.
4. Click the APPL
Y button.
You are asked to enter the password for the switch.
5. Enter the switch’
s password in the password field.
The switch’s default password is password.
The Switch Status page displays.
6. Select VLAN.
The Basic Port-based VLAN page displays.
7. If this is the first time that you are accessing the Basic Port-based VLAN Configuration
page or if you are changing the VLAN assignment method, select the Enable radio button
and continue with
Step 8.
Otherwise, go to
Step 9.
A pop-up window opens, informing you that the current VLAN settings will be lost.
8. Click the Ye
s button.
The pop-up window closes and the Basic Port-based VLAN Configuration page displays.
9. Under each port to be added to a VLAN, enter the VLAN ID of the VLAN.