User Manual
Table Of Contents
- 8-Port or 16-Port 10-Gigabit/Multi-Gigabit Smart Managed Plus Switch with 1 Copper/SFP+ Combo Port
- Contents
- 1 Hardware Setup
- 2 Getting Started
- Configure the switch
- Access the switch using a web browser
- Access the switch with the ProSAFE Plus Utility
- Use the NETGEAR Switch Discovery Tool to access the switch
- Use the NETGEAR Insight App to discover and register the switch
- Change the language of the local browser interface
- Change the password
- Register your product
- 3 Network Settings
- 4 Optimize Performance With Quality of Service
- 5 Use VLANS for Traffic Segmentation
- 6 Manage and Monitor the Switch
- Manage flow control
- Manage the port speed
- Enable loop detection
- Manage Energy Efficient Ethernet and other power saving options
- Upgrade the firmware
- Reboot the switch
- Save the switch configuration
- Restore a saved switch configuration
- Restore factory default settings
- Enable port mirroring
- View switch information
- View the port statistics
- 7 Diagnostics and Troubleshooting
- A Supplemental Information
49
5
5Use VLANS for Traffic Segmentation
This chapter covers the following topics:
• VLAN overview
• Create basic port-based VLANs
• Assign ports to multiple port-based VLANs
• Create 802.1Q-based VLANs in a basic configuration
• Create 802.1Q-based VLANs in an advanced configuration
• Add tagged or untagged ports to an 802.1Q-based VLAN
• Specify a port PVID for an 802.1Q-based VLAN
Note: All configuration pages shown are for illustration purposes only and
show the XS708Ev2 product. Model XS716E configuration pages
look similar but include additional ports to configure.