User Manual

8-Port or 16-Port 10-Gigabit/Multi-Gigabit Smart Managed Plus Switch
Optimize Performance With Quality of
Service
User Manual47
5. Select QoS > Broadcast Filtering.
The Broadcast Filtering page displays.
6. If this is the first time that you are setting up broadcast filtering,
select the Enable radio
button and continue with
Step 7.
Otherwise, go to
Step 8.
7. Click the Apply button.
Your settings are saved and the Storm Control Rate table displays.
8. Set the storm control rate by doing the following:
a. Select one or more ports.
b. In the Storm Control Rate menu, select the maximum rate.
You can set a rate from 32 to 4096 Mbps. By default, no limit is set.
c. Click the Apply button.
Your settings are saved.
9. T
o set a different rate for one or more other ports, repeat Step 8.
Use the ProSAFE Plus Utility to set up broadcast filtering
To set up broadcast filtering:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is
of
f-network using an Ethernet cable.
2. Double-click the ProSAFE Plus Utility icon.
The Switch Selection page displays a list of Web Managed switches that it discovers on
the local network.
3. Select the switch.