User Manual

8-Port or 16-Port 10-Gigabit/Multi-Gigabit Smart Managed Plus Switch
Optimize Performance With Quality of
Service
User Manual45
c. In the Egress Rate menu, select the maximum rate.
You can set a rate from 32 to 4096 Mbit/s. By default, no limit is set.
d. Click the Apply button.
Your settings are saved.
7. T
o set different rates for one or more other ports, repeat Step 6.
Use the ProSAFE Plus Utility to set up rate limiting
To set up rate limiting:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is
of
f-network using an Ethernet cable.
2. Double-click the ProSAFE Plus Utility icon.
The Switch Selection page displays a list of Web Managed switches that it discovers on
the local network.
3. Select the switch.
If you do not see the switch, click the REFRESH button.
4. Click the APPL
Y button.
You are asked to enter the password for the switch.
5. Enter the switch’
s password in the password field.
The switch’s default password is password.
The Switch Status page displays.
6. Select QoS > Rate Limit.