User Manual

8-Port or 16-Port 10-Gigabit/Multi-Gigabit Smart Managed Plus Switch
Optimize Performance With Quality of
Service
User Manual43
The Switch Status page displays.
6. Select QoS.
The Quality of Service page displays.
7. If this is the first time that you are setting up port-based QoS,
select the Port Based radio
button and continue with
Step 8.
Otherwise, go to
Step 9.
A pop-up window opens, informing you that the current QoS settings will be lost.
8. Click the Ye
s button.
The pop-up window closes and the port priority options display.
9. To set the port priority for one or more ports, do the following:
a. Select one or more ports.
b. In the Priority section, select the priority by moving the slider
.
The default setting is Low Priority(P0).
Click the APPL
Y button.
Your settings are saved. The same priority is applied to all ports that you selected.
10. T
o set a different port priority for one or more other ports, repeat Step 9.