User Manual

8-Port or 16-Port 10-Gigabit/Multi-Gigabit Smart Managed Plus Switch
User Manual4
Use the ProSAFE Plus Utility to specify LAG membership
and enable LAGs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Chapter 4 Optimize Performance With Quality of Service
Enable 802.1p/DSCP-based Quality of Service . . . . . . . . . . . . . . . . . . . . . .39
Use the local browser interface to enable 802.1p/DSCP-based QoS .39
Use the ProSAFE Plus Utility to enable 802.1p/DSCP-based QoS . . . .40
Configure port-based Quality of Service . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Use the local browser interface to configure port-based QoS . . . . . . .41
Use the ProSAFE Plus Utility to configure port-based QoS . . . . . . . . . .42
Set up rate limiting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Use the local browser interface to set up rate limiting . . . . . . . . . . . . . .44
Use the ProSAFE Plus Utility to set up rate limiting . . . . . . . . . . . . . . . . .45
Set up broadcast filtering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Use the local browser interface to set up broadcast filtering. . . . . . . . .46
Use the ProSAFE Plus Utility to set up broadcast filtering . . . . . . . . . . .47
Chapter 5 Use VLANS for Traffic Segmentation
VLAN overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
Create basic port-based VLANs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Use the local browser interface to create basic port-based VLANs . . .50
Use the ProSAFE Plus Utility to create basic port-based VLANs . . . . . .52
Assign ports to multiple port-based VLANs. . . . . . . . . . . . . . . . . . . . . . . . . . 53
Use the local browser interface to assign ports to multiple
port-based VLANs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Use the ProSAFE Plus Utility to assign ports to multiple
port-based VLANs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Create 802.1Q-based VLANs in a basic configuration . . . . . . . . . . . . . . . . . 56
Use the local browser interface to create 802.1Q-based
VLANs in a basic configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Use the ProSAFE Plus Utility to create 802.1Q-based
VLANs in a basic configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
Create 802.1Q-based VLANs in an advanced configuration . . . . . . . . . . . 59
Use the local browser interface to create 802.1Q-based
VLANs in an advanced configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . .59
Use the ProSAFE Plus Utility to create 802.1Q-based
VLANs in an advanced configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . .61
Add tagged or untagged ports to an 802.1Q-based VLAN . . . . . . . . . . . . 62
Use the local browser interface to add tagged or
untagged ports to an 802.1Q-based VLAN . . . . . . . . . . . . . . . . . . . . . . .63
Use the ProSAFE Plus Utility to add tagged or untagged
ports to an 802.1Q-based VLAN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64
Specify a port PVID for an 802.1Q-based VLAN . . . . . . . . . . . . . . . . . . . . . . 65
Use the local browser interface to assign a PVID to ports . . . . . . . . . . .65
Use the ProSAFE Plus Utility to assign a PVID to ports . . . . . . . . . . . . . .66