User Manual
Table Of Contents
- 8-Port or 16-Port 10-Gigabit/Multi-Gigabit Smart Managed Plus Switch with 1 Copper/SFP+ Combo Port
- Contents
- 1 Hardware Setup
- 2 Getting Started
- Configure the switch
- Access the switch using a web browser
- Access the switch with the ProSAFE Plus Utility
- Use the NETGEAR Switch Discovery Tool to access the switch
- Use the NETGEAR Insight App to discover and register the switch
- Change the language of the local browser interface
- Change the password
- Register your product
- 3 Network Settings
- 4 Optimize Performance With Quality of Service
- 5 Use VLANS for Traffic Segmentation
- 6 Manage and Monitor the Switch
- Manage flow control
- Manage the port speed
- Enable loop detection
- Manage Energy Efficient Ethernet and other power saving options
- Upgrade the firmware
- Reboot the switch
- Save the switch configuration
- Restore a saved switch configuration
- Restore factory default settings
- Enable port mirroring
- View switch information
- View the port statistics
- 7 Diagnostics and Troubleshooting
- A Supplemental Information
8-Port or 16-Port 10-Gigabit/Multi-Gigabit Smart Managed Plus Switch
Hardware Setup User Manual10
XS716E front panel
Power and
Factory
Defaults button
Fan LEDs
100M/1G/10G RJ-45 ports
SFP+ slot
The following figure shows the front panel of the switch.
Figure 4. XS716E switch front panel
From left to right, the front panel contains the following components:
• Power and Fan LEDs.
• Recessed Factory Defaults button to restore the device back to the factory defaults.
• Sixteen RJ-45 connectors for 100M/1G/10G
AutoSensing 10-Gigabit Ethernet switching
ports.
• One port (16) is a combo port:
You can either use port 16T as Gigabit Ethernet switching
port or you can install a fiber module in 1G/10G SFP+ slot 16F.
• Speed and
Activity (ACT) LEDs for each port.
Switch back panel
The back panel contains a Kensington™ lock slot and the AC power connector.
The following figure shows the back panel of model XS708Ev2.
AC power connector
Kensington lock slot
Figure 5. XS708Ev2 switch back panel
The following figure shows the back panel of model XS716E.
AC power connector
Kensington lock slot
Figure 6. XS716E switch back panel